The use of composite materials in the manufacture of various structural component parts continues to increase. At least due to the strength-to-weight ratios, composite materials offer advantages as replacements for denser materials such as, for example, metals, metal alloys, etc., where the overall weight of a completed structure (or the weight of a component part of a completed structure) is an important consideration in the selection of materials used in the manufacture of such a completed structure, or in the manufacture of a component of a completed structure. Coating layers typically applied to composite materials are not as durable as, or have the longevity of, the composite materials to which such coating layers are applied. Composite material assemblies may otherwise comprise external or internal layers that can include, for example, protective coatings or other coating layers. For example, when composite materials are used in the fabrication of vehicles including, for example, aircraft, exterior paint coatings, referred to as an aircraft “livery”, may require alteration, rework, change of logo, design, color scheme, etc., over the useful life of the vehicle. Such livery alteration, for example, may include the removal of one or more decorative coating layers applied onto a composite material, including, for example, one or more paint layers. However, the removal of one layer or layer type (paint, primer, adhesion promoting layer, adhesive layer, etc.) from materials stacked onto a composite material can require the removal of additional layers or layer types that then must be built back up, or otherwise reconstituted. In addition, livery alteration or other rework requiring paint removal via use of paint removal techniques can damage underlying layers, or even damage composite materials (e.g., if the composite materials are exposed to excessive mechanical paint removal techniques). Further, composite components made from composite materials used in the manufacture of larger structures (e.g., aircraft, etc.) may encounter electromagnetic effects (EMEs) during operation, including, for example, and without limitation, lightning strikes, static electricity buildup, etc. When such a structure encounters an EME, the electric current delivered to the structure can travel through the structure and damage dielectric (e.g., insulating) material including, for example, composite substrate structural materials and insulative coatings on the composite substrate structural materials. Unless explicitly identified as such, no statement herein is admitted as prior art merely by its inclusion in the Technological Field and/or Background section. SUMMARY According to present aspects, a co-curable UV/visible light-resistant composite material stack for an aircraft assembly is disclosed, comprising a co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film comprising a first cure characteristic having a first cure characteristic value, with the first cure characteristic value comprising at least one of a first gel point temperature value, a first gel time value, and a first curing viscosity value, and a co-curable epoxy resin-containing composite material substrate, with the co-curable epoxy resin-containing composite material substrate comprising a co-curable epoxy resin comprising an induced second cure characteristic having a co-curable epoxy resin comprising an induced second cure characteristic value, with the induced second cure characteristic value comprising at least one of a second gel point temperature value, a second gel time value, and a second curing viscosity value. The co-curable UV/visible light-resistant composite material stack for an aircraft assembly further comprises a dry veil material layer comprising a dry veil material layer first side and a dry veil material layer second side, with the dry veil material layer positioned immediately adjacent to the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer, with the dry veil material layer comprising dry veil material layer fibers, with the dry veil material fibers comprising at least one of metal fibers, glass fibers, carbon fibers, polymer fibers, natural-product fibers, coated metal fibers, metal-coated glass fibers, metal-coated carbon fibers, metal-coated fibers metal-coated polymer fibers, metal-coated natural-product fibers, and combinations thereof. The co-curable UV/visible light-resistant composite material stack for an aircraft assembly further comprises a lightning strike protection layer positioned adjacent at least one of the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film and the dry veil material layer second side, and wherein the first cure characteristic value and the induced second cure characteristic value establish a selected differential cure characteristic value between the first cure characteristic value and the induced second cure characteristic value. In another present aspect, the dry veil material layer is interposed between the co-curable epoxy resin-containing composite material substrate and the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film. In another present aspect, the co-curable UV/light-resistant composite material stack, further comprises a lightning strike protection layer positioned between the co-curable epoxy resin-containing composite material substrate and the dry veil material layer, with the lightning strike protection layer configured to be in immediate contact with the co-curable epoxy resin-containing composite material substrate. In another present aspect, the co-curable UV/light-resistant composite material stack, further comprises a lightning strike protection layer positioned adjacent the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film. In another present aspect, the lightning strike protection layer is a separate layer in the co-curable UV/light-resistant composite material stack. In another present aspect, the dry veil material layer comprises at least one of metal fibers, metal-coated fibers, and combinations thereof, wherein said dry veil material layer disperses an electromagnetic effect from the co-curable UV/visible light-resistant composite material stack in a co-cured state. In another present aspect, the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film comprising the first cure characteristic is 100% responsible for the UV/visible light-resistant properties in the co-curable UV/visible light-resistant composite material stack. In another present aspect, the lightning strike protection layer comprises a UV/visible light-resistant material, with the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film in combination with the UV/visible light-resistant layer lightning strike protection layer are together 100% responsible for the UV/visible light-resistant properties in the co-curable UV/visible light-resistant composite material stack. In another present aspect, the first gel point temperature value is less than the second gel point temperature value. In another present aspect, the co-curable epoxy resin-containing composite material substrate comprises a material substrate epoxy resin, with the material substrate epoxy resin comprising the second gel point temperature value, with the second gel point temperature value greater than 150ºC, with the material substrate epoxy resin further comprising the second curing viscosity value, with the second curing viscosity value greater than about 1000 Pa-s at the second gel point temperature value, and wherein the first gel point temperature value of said co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film is less than 150ºC. In another present aspect, the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film further comprises a UV/visible light resistivity value of about 12,000 kJ/m 2 for full spectrum UV light at a UV wavelength ranging from about 300 nm to about 400 nm, and about 43,000 kJ/m 2 at a visible light wavelength ranging from about 400 to about 700 nm at an unsupported epoxy resin-based UV/visible light-resistant material layer film thickness ranging from about 0.0001 to about 0.010 inches. In another present aspect, the lightning strike protection layer comprises an electrical conductivity ranging from 0.01 milliOhms per square to 0.5 milliOhms per square. In another present aspect, the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film is a single layer film, wherein the single layer film completely covers at least one of the dry veil material layer first side and the dry veil material layer second side. Another present aspect is directed to a co-cured UV/visible light-resistant composite material stack made from the present co-curable UV/visible light-resistant composite material stack wherein, during co-curing the dry veil material layer is infiltrated only with epoxy resin from the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film. In another present aspect, after co-curing, the dry veil material layer does not comprise a detectable amount of epoxy-based resin from the co-curable epoxy resin-containing composite material substrate in a co-cured state. In another present aspect, after co-curing, no detectable amount of epoxy resin from the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film is detected in the co-curable epoxy resin-containing composite material substrate in a co-cured state. Another present aspect is directed to a co-cured aircraft structure comprising the present co-curable UV/visible light-resistant composite in a co-cured state, with the co-curable UV/visible light-resistant composite material stack co-cured to form a co-cured UV/visible light-resistant composite material stack in the co-cured state, with the co-cured aircraft structure comprising at least one of a horizontal stabilizer assembly and wing assembly, and with the co-curable UV/visible light-resistant composite material stack comprising a co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film comprising a first cure characteristic having a first cure characteristic value, with the first cure characteristic value comprising at least one of a first gel point temperature value, a first gel time value, and a first curing viscosity value, and a co-curable epoxy resin-containing composite material substrate, with the co-curable epoxy resin-containing material substrate comprising a co-curable epoxy resin comprising an induced second cure characteristic having an induce second sure characteristic value, with the induced second cure characteristic value comprising at least one of a second gel point temperature value, a second gel time value, and a second curing viscosity value. The co-curable UV/visible light-resistant composite material stack for an aircraft assembly further comprises a dry veil material layer comprising a dry veil material layer first side and a dry veil material layer second side, with the dry veil material layer positioned immediately adjacent to the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer, with the dry veil material layer comprising dry veil material layer fibers, with the dry veil material fibers comprising at least one of metal fibers, glass fibers, carbon fibers, polymer fibers, natural-product fibers, coated metal fibers, metal-coated glass fibers, metal-coated carbon fibers, metal-coated polymer fibers, metal-coated natural-product fibers, and combinations thereof, and wherein said first cure characteristic value and the induced second cure characteristic value establish a selected differential cure characteristic value between the first cure characteristic value and the induced second cure characteristic value. The co-cured UV/light-resistant composite material stack further comprises a lightning strike protection layer positioned adjacent the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film. Another present aspect is directed to an aircraft comprising the present co-cured aircraft structure comprising the present co-curable UV/visible light-resistant composite material in a co-cured state, with co-curable UV/visible light-resistant composite material stack co-cured to form a co-cured UV/visible light-resistant composite material in the co-cured state, with the co-cured aircraft structure comprising at least one of a horizontal stabilizer assembly and wing assembly, and with the co-curable UV/visible light-resistant composite material stack comprising a co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film comprising a first cure characteristic having a first cure characteristic value, with the first cure characteristic value comprising at least one of a first gel point temperature value, a first gel time value, and a first curing viscosity value, and a co-curable epoxy resin-containing composite material substrate, with the co-curable epoxy resin-containing composite material substrate comprising a co-curable epoxy resin comprising an induced second cure characteristic having an induced second cure characteristic value, with the induced second cure characteristic value comprising at least one of a second gel point temperature value, a second gel time value, and a second curing viscosity value. The co-curable UV/visible light-resistant composite material stack for an aircraft assembly further comprises a dry veil material layer comprising a dry veil material layer first side and a dry veil material layer second side, with the dry veil material layer positioned immediately adjacent to the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer, with the dry veil material layer comprising dry veil material layer fibers, with the dry veil material fibers comprising at least one of metal fibers, glass fibers, carbon fibers, polymer fibers, natural-product fibers, coated metal fibers, metal-coated glass fibers, metal-coated carbon fibers, metal-coated polymer fibers, metal-coated natural-product fibers, and combinations thereof, and wherein said first cure characteristic value and the induced second cure characteristic value are each configured to establish a selected differential cure characteristic value between the first cure characteristic value and the induced second cure characteristic value. The co-cured UV/light-resistant composite material further comprises a lightning strike protection layer positioned adjacent the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film. Another present aspect is directed to a method for preparing a co-curable UV/visible light-resistant composite material stack for an aircraft structure, with the method comprising forming the co-curable UV/visible light-resistant composite material stack for the aircraft structure, with the co-curable UV/visible light-resistant composite material stack comprising a co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film comprising a first cure characteristic having a first cure characteristic value, with the first cure characteristic value comprising at least one of a first gel point temperature value, a first gel time value, and a first curing viscosity value. The co-curable UV/visible light-resistant composite material stack further comprises a co-curable epoxy resin-containing composite material substrate, with the co-curable epoxy resin-containing composite material substrate comprising a co-curable epoxy resin comprising an induced second cure characteristic having an induced second cure characteristic value, with the induced second cure characteristic value comprising at least one of a second gel point temperature value, a second gel time value, and a second curing viscosity value. The co-curable UV/visible light-resistant composite material stack further comprises a dry veil material layer comprising a dry veil material layer first side and a dry veil material layer second side, said dry veil material layer positioned immediately adjacent to the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film, with the dry veil material layer comprising dry veil material layer fibers, with the dry veil material fibers comprising at least one of metal fibers, glass fibers, carbon fibers, polymer fibers, natural-product fibers, coated metal fibers, metal-coated glass fibers, metal-coated carbon fibers, metal-coated polymer fibers, metal-coated natural-product fibers, and combinations thereof. The co-curable UV/visible light-resistant composite material stack further comprises a lightning strike protection layer positioned adjacent the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film. The method further comprises establishing intentionally a differential cure characteristic value between the first cure characteristic value and the induced second cure characteristic value, and wherein said first gel point temperature value is less than the second gel point temperature value. Another present aspect is directed to a method for preparing a co-cured UV/visible light-resistant composite material for an aircraft structure, with the method comprising forming a co-curable composite material stack, with the co-curable composite material stack comprising a co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film comprising a first cure characteristic having a first characteristic value, with the first cure characteristic value comprising at least one of a first gel point temperature value, a first gel time value, and a first curing viscosity value. The co-curable UV/visible light-resistant composite material stack further comprises a co-curable epoxy resin-containing composite material substrate, with the co-curable epoxy resin-containing composite material substrate comprising a co-curable epoxy resin comprising an induced second cure characteristic having induced second cure characteristic value, with the induced second cure characteristic value comprising at least one of a second gel point temperature value, a second gel time value, and a second curing viscosity value. The co-curable UV/visible light-resistant composite material stack further comprises a dry veil material layer comprising a dry veil material layer first side and a dry veil material layer second side, said dry veil material layer positioned immediately adjacent to the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film said dry veil material layer comprising dry veil material layer fibers, with the dry veil material comprising at least one of metal fibers, glass fibers, carbon fibers, polymer fibers, natural-product fibers, coated metal fibers, metal-coated glass fibers, metal-coated carbon fibers, metal-coated polymer fibers, metal-coated natural-product fibers, and combinations thereof. The co-curable UV/visible light-resistant composite material stack further comprises a lightning strike protection layer positioned adjacent the co-curable unsupported epoxy resin-based UV/visible light-resistant material layer film. The method further comprises establishing intentionally a differential cure characteristic between the first cure characteristic value and the induced second cure characteristic value during co-curing, co-curing the co-curable composite material stack in a selected curing regimen to form the co-cured UV/visible light-resistant composite material for the aircraft structure, with the co-cured UV/visib